Part Number Hot Search : 
TB30N0 CM9100 ELM611DA 002XX P010239 CMMT591A 0PFTN SLA7032M
Product Description
Full Text Search
 

To Download PT6305B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 For assistance or to order, call
(800) 531-5782
PT6305
Series
3 AMP HIGH-PERFORMANCE ADJUSTABLE ISR
* Single-Device 5V to 3V Power * 85% Efficiency * Small SIP Footprint: 0.36" x 2.00" x 0.60"(H) * Wide Input Voltage Range: +4.5V to +9.0V * Internal Short Circuit Protection * Over-Temperature Protection The PT6305N is Power Trends' new high performance +5V to +3.3V, 3 Amp, 12-Pin SIP (Single In-linePackage) Integrated Switching Regulator (ISR). This high-performance ISR allows easy integration of low-power 3.3V logic IC's into existing 5V systems without redesigning the central power supply. Only one external capacitor is required for proper operation. The PT6306,7,8 can be used to power high-speed data buses (+2.1V), or the new GTL (+1.2V) logic buses.
Pin-Out Information
Pin No. Function 1 N/C 2 Vin 3 Vin 4 Vin 5 GND 6 GND Pin No. Function 7 GND 8 GND 9 Vout 10 Vout 11 Vout 12 Adjust
(See page 40.)
Ordering Information
PT6305n PT6306n PT6307n PT6308n = +3.3 Volts = +1.8 Volts = +2.1 Volts = +1.2 Volts
Standard Application
12 VIN (+) 2,3,4 9,10,11 VO Adjust VOUT (+)
(For dimensions, see page 66.)
PT6305,6,7,8
C1 C2 5,6,7,8
PT Series Suffix (PT1234X)
Case/Pin Configuration Vertical Through-Hole Horizontal Through-Hole Horizontal Surface Mount Heat Tab Configuration None Side
COM
COM
C1 = Optional electrolytic (100F) C2 = Required 100F electrolytic (No tantalum) See capacitor application note on page 43.
N A C
R G B
1
12
Specifications
Characteristics (TA=25C unless noted) Output Current Current Limit Short Circuit Current Input Voltage Range Symbols Io Icl Isc Vin Conditions 4.5 Vin Vin MAX Vin = +5V Vin = +5V 0.3A Io 3.0A PT6305N PT6306N PT6307N PT6308N PT6305N PT6306N PT6307N PT6308N
(See Thermal Application Notes on page 44 for heat tab application data.)
PT6305 SERIES
Min 0.3 -- -- 4.5 4.5 4.5 4.5 3.2 1.7 2.0 1.1 -- -- -- -- -- -- -- -- -- -- -- -- -- 500 0 -- -40 -- -- -- 0 Typ -- 3.6 5.0 -- -- -- -- 3.3 1.8 2.1 1.2 25 25 66 200 200 85 74 77 63 80 68 72 57 650 -- 25 -- -- -- 11.2 -- Max 3.0** 5.0 -- 9 9 9 6.0 3.4 1.9 2.2 1.3 50 50 -- -- -- -- -- -- -- -- -- -- -- 800 +70* -- +125 500 15 -- 95 Units ADC ADC Apk VDC VDC VDC VDC VDC VDC VDC VDC mV mV mV Sec mV % % % % % % % % KHz C C/W C G's G's grams %
Static Voltage Tolerance
Vo
Vin = +5V, Io = 3.0A 0C Ta +70C
Line Regulation Load Regulation Vo Ripple/Noise pk-pk Transient Response with C2 = 100F Efficiency
Regline Regload Vn ttr Vos
4.5V Vin 5.5V, Io = 3.0A Vin = +5V, 0.3 Io 3.0A Vin = 5V, Io = 3.0A Io step between 1.5A and 3.0A Vo over/undershoot Vin = +5V, Io = 1.5A PT6305N PT6306N PT6307N PT6308N PT6305N PT6306N PT6307N PT6308N
Vin = +5V, Io = 3.0A
Switching Frequency Operating Temperature Thermal Resistance Storage Temperature Mechanical Shock Mechanical Vibration Weight Relative Humidity
o Ta
4.5 Vin Vin MAX 0.3A Io 3.0A Free Air Convection (40-60 LFM) Over Vin and Io Ranges Free Air Convection (40-60 LFM) --
ja
Ts
Per Mil-STD-883D, Method 2002.3 Condition A, 1 msec, Half Sine, mounted to a fixture Per Mil-STD-883D, Method 2007.2 Condition A, 20-2000 Hz -- -- -- Non-condensing
*See Thermal Derating chart. **The PT6305 Series can be easily paralleled to provide output current in multiples of 3 amps. Please contact a Power Trends' Application Engineer for the appropriate application note. Note: The PT6305 Series requires a 100F electrolytic capacitor for proper operation in all applications.
24
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902
For assistance or to order, call
(800) 531-5782
CHARACTERISTIC
DATA
PT6305, 3.3 VDC
(See Note 1)
PT6307, 2.1 VDC
(See Note 1)
PT6308, 1.2 VDC
(See Note 1)
High-Performance ISRs
DATA SHEETS
Efficiency vs Output Current
100 90
Vin
Efficiency vs Output Current
100 90
Vin 4.5V 5.0V 4.5V 5.0V 5.5V
Efficiency vs Output Current
100 90 Efficiency - % 80 70 60 50 40
Vin 4.5V 5.0V 5.5V 6.0V
Efficiency - %
Efficiency - %
80 70 60 50 40 0 0.5 1 1.5 2 Iout-(Amps) 2.5 3
80 70 60 50 40 0 0.5 1 1.5 2 Iout-(Amps) 2.5 3
5.5V 8.0V 9.0V
8.0V 9.0V
0
0.5
1
1.5 Iout-(Amps)
2
2.5
3
Ripple vs Output Current
100
Ripple vs Output Current
100 100
Vin 9.0V
Ripple vs Output Current
80 Ripple-(mV)
Vin 9.0V
80 Ripple-(mV)
80
Vin
Ripple (mv)
60
8.0V 5.5V
60
8.0V 5.5V
60 40 20 0
6.0V 5.5V 5.0V 4.5V
40
5.0V 4.5V
40
5.0V 4.5V
20
20
0 0 0.5 1 1.5 Iout-(Amps) 2 2.5 3
0 0 0.5 1 1.5 Iout-(Amps) 2 2.5 3
0
0.5
1
1.5 Iout-(Amps)
2
2.5
3
Minimum Input Voltage
4.5 4.3
(See Note 2)
Minimum Input Voltage
4.5
(See Note 2)
4.5
Minimum Input Voltage
(See Note 2)
4.25 Vin-(Volts) Vin-(Volts)
4.25
Vin-(Volts)
4.1
4
4
3.9 3.7
3.75
3.75
3.5 0 0.5 1 1.5 Iout-(Amps) 2 2.5 3
3.5 0 0.5 1 1.5 Iout-(Amps) 2 2.5 3
3.5 0 0.5 1 1.5 Iout-(Amps) 2 2.5 3
Thermal Derating (Ta)
3 2.5
(See Note 3)
70C
Thermal Derating (Ta)
3 2.5
(See Note 3)
85C 90C
Thermal Derating (Ta)
3 2.5
(See Note 3)
85C 90C
85C
95C
2 Iout-(Amps)
90C
2 Iout-(Amps) Iout-(Amps) 6.5 Vin-(Volts) 8.5 10.5 1.5 1 0.5 0 4.5 6.5 Vin-(Volts) 8.5 10.5 4.5
2 1.5 1 0.5 0 4.5 5 Vin-(Volts) 5.5 6
1.5
95C
1 0.5 0
Power Dissipation vs Output Current
3 2.5
Vin
Power Dissipation vs Output Current
3 2.5 2 Pd-(Watts) 1.5 1 0.5 0
Vin 9.0V 8.0V 5.5V 5.0V 4.5V
Power Dissipation vs Output Current
3 2.5
Vin
2 Pd-(Watts) 1.5 1 0.5 0 0 0.5 1 1.5 Iout-(Amps) 2 2.5 3
9.0V 8.0V 5.5V 5.0V 4.5V
2 Pd-(Watts) 1.5 1 0.5 0
6.0V 5.5V 5.0V 4.5V
0
0.5
1
1.5 Iout-(Amps)
2
2.5
3
0
0.5
1
1.5 Iout-(Amps)
2
2.5
3
Note 1: All data listed in the above graphs, except for derating data, has been developed from actual products tested at 25C. This data is considered typical data for the ISR. Note 2: Minimum Vin data is typical and is not guaranteed. The data corresponds to a 2% output voltage drop. Note 3: Thermal derating graphs are developed in free air convection cooling of 40-60 LFM with no optional heat tab soldered in a printed circuit board. (See Thermal Application Notes).
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902
25
For assistance or to order, call
(800) 531-5782
Product families using this package style:
Package Style 300
Suffix A, C, D, E, N, P
PT6400 PT5060
PACKAGE INFORMATION AND DIMENSIONS
Revised 2/11/2000
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.ti.com/powertrends
IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.
Copyright (c) 2000, Texas Instruments Incorporated
This datasheet has been download from: www..com Datasheets for electronics components.


▲Up To Search▲   

 
Price & Availability of PT6305B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X